Showing 1–16 of 34 results
-
- Two brightness variants — 220 nit for indoor/industrial; 1000 nit for outdoor and high-ambient-light
- eDP 1.2 interface, 2.7Gbps/2-lane — modern interface for current and next-gen hardware designs
- 1920×1080 FHD, 1000:1 contrast, 16.7M colours — accurate reproduction across all ambient conditions
- Anti-glare 3H surface, 263.4×157.22×4.5mm — ready for direct panel integration without additional treatment
- 30,000-hour backlight lifespan — designed for continuous industrial and commercial operation
Request a Quote
-
- 1000 nit as standard — high-brightness baseline for ambient-light-competitive environments
- a-Si TFT-LCD — proven, cost-effective technology with broad driver and controller ecosystem support
- 240–280 nit low-power variant available — same footprint, lower draw for enclosed installations
- eDP 1.2, 2.7Gbps/2-lane — current interface standard, 30,000-hour backlight lifespan
- 85°/85°/85°/85° viewing angles — accurate at any approach angle for shared-view applications
Request a Quote
-
- 8mm depth — the thinnest TFT LCD module in the DNR Touch range, optimised for slim-form-factor designs
- eDP 1.2, 2.7Gbps/2-lane — current interface standard for notebook and compact industrial applications
- On-board LED driver + EDID chip — reduces integration complexity vs externally-driven modules
- 1920×1080 FHD, 1000:1 contrast, 85°/85°/85°/85° viewing angles, 30,000-hour lifespan
-
- 90% NTSC colour gamut — the widest in the DNR Touch module range, ahead of 72% NTSC alternatives
- Two brightness variants — 280 nit standard (indoor) or 800–1000 nit (outdoor/high-ambient)
- 1920×1080 FHD, 800:1 contrast, 85°/85°/85°/85° viewing angles
- a-Si TFT-LCD, 4.9mm slim profile — proven technology, thinnest 15.6″ module in the range
- 30,000-hour backlight lifespan, 3.3V supply, anti-glare 3H surface
Request a Quote
-
- 1920×1200 WUXGA (16:10) — the only non-16:9 module in the DNR Touch range; 120 more vertical pixels than FHD
- 1200:1 contrast ratio — the highest contrast in the module range, ahead of all 1000:1 alternatives
- 89°/89°/89°/89° viewing angles, 20ms response — widest angles and fastest response in the module range
- 9mm depth, 280–340 cd/m² (two variants), eDP 1.2 2-lane, 30,000-hour lifespan
Request a Quote
-
- 14ms response time — the fastest in the DNR Touch module range, ahead of the 20ms WH160 and 25–30ms eDP modules
- 900–1000 nit high-brightness variant (WB185-M188H) — outdoor-adjacent and high-ambient-light LVDS module
- 30-pin dual-channel LVDS — compatible with LVDS controller architectures (same interface as the WB238)
- HADS 89°/89°/89°/89° wide-angle technology, 1000:1 contrast, 300 cd/m² standard, 5V supply
Request a Quote
-
- 14ms response time — the fastest in the DNR Touch module range, same as the WB185 (18.5″) LVDS sibling
- 900–1000 nit high-brightness variant — outdoor-adjacent and high-ambient-light LVDS option
- 30-pin dual-channel LVDS, HADS 89°/89°/89°/89° — wide-angle, legacy-compatible interface
- 1000:1 contrast, 300 cd/m² standard, 5V supply, 30,000-hour lifespan
Inquiry now
-
- Fully flat, fully sealed — IP65/IP66-rated, a sealing standard bezel-mounted monitors can’t match
- 10-point capacitive multi-touch — precise, low-latency response for complex gaming gestures
- Single laminated glass surface — zero gaps for dust or liquid, wipes clean in seconds
- 1920×1080 FHD, 1000:1 contrast, 178°/178° viewing angles — sharp from any seat on the floor
Request a Quote
-
- 30-pin dual-channel LVDS interface — compatible with legacy and current industrial controller designs
- Two brightness variants — 250 nit standard or 800–1000 nit for high-ambient and outdoor use
- HADS wide-viewing-angle technology — 89°/89°/89°/89°, consistent colour from any approach
- 1920×1080 FHD, 1000:1 contrast, 16.7M colours, 72% NTSC
- 30,000-hour backlight lifespan, RoHS compliant, anti-glare 3H surface
Request a Quote
-
- 14ms response time — the fastest in the DNR Touch module range, same as the WB185 (18.5″) LVDS sibling
- 900–1000 nit high-brightness variant — outdoor-adjacent and high-ambient-light LVDS option
- 30-pin dual-channel LVDS, HADS 89°/89°/89°/89° — wide-angle, legacy-compatible interface
- 1000:1 contrast, 300 cd/m² standard, 5V supply, 30,000-hour lifespan
Request a Quote
-
- Fully flat, fully sealed — IP65/IP66-rated glass sealing standard bezel-mounted monitors can’t match
- 10-point capacitive multi-touch — precise, low-latency response for complex gaming gestures
- Onboard RGB halo lighting — 40+ modes via RS232 control, unique to this size in the DNR Touch range
- 1920×1080 FHD, 1000:1 contrast, 178°/178° viewing angles — sharp from any seat on the floor
Request a Quote
-
- Largest module in the DNR Touch range — 31.5″ FHD, built for large-format HMI and display-terminal applications
- 8ms (G2G) response time — fast gray-to-gray response for motion-sensitive interfaces
- 800–1000 nit high-brightness variant (WB315-M195H) — outdoor-adjacent and high-ambient-light deployments
- 51-pin LVDS (2ch, 8-bit), 1200:1 contrast, 89°/89°/89°/89° viewing angles, 12V supply
Request a Quote
-
- 3000:1 contrast ratio — sharper, more dramatic visuals than the 1300:1 rating on the 43″/49″ C-curved siblings
- 50,000-hour backlight lifespan — floor-grade endurance for 24/7 casino operation
- 200Hz scanning, 10-point GFF capacitive touch — fast, precise response with no touch pressure required
- Mohs-7 physically-tempered, explosion-proof glass — hardened for continuous public-facing use
Request a Quote
-
- J-curved asymmetric profile — engineered for top-screen positions in multi-screen cabinet configurations
- 3840×2160 4K — the only 4K gaming monitor in the DNR Touch range, at 102 PPI across 43″
- 50,000-hour lifespan, 200Hz GFF touch, 50M activation cycles — floor-grade endurance
- DisplayPort + HDMI 1.4 — connects to modern gaming board DP output without adapters
Request a Quote
-
- 4K or 2K — choose the display config that matches your gaming board’s output interface
- C-curved at 43″ — immersive wrap for the main player-facing position, reduced glare from overhead lighting
- 1300:1 contrast, 50,000-hour lifespan, 200Hz GFF touch — floor-grade specs across both configs
- AC 100–240V wide voltage — deploys globally without a transformer
Inquiry now
-
- 49″ 4K at the top position — 14% more screen area than the 43″ model, same J-curve cabinet geometry
- 3× HDMI inputs — supports multi-source cabinet architectures without external switching hardware
- 50,000-hour lifespan, 200Hz GFF touch, 50M activation cycles — same floor-grade endurance as the 43″
- 165W max power, AC 220V — plan electrical circuits and confirm supply voltage for your market
Request a Quote
